Pinealon × trivialbioworks peptides — lab test, July 2026
COA KVR-2026-9C6BC4 matches Kovera Labs's public record. So this test doesn't rest on our review alone — the lab confirms it too.
BYPNOAQTest results
About this test
Label 10 mg · Lab measured 9.83 mg
98% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.5 mg using the measured mass, against 2.5 mg on the label — 2% less.
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
| Report number | KVR-2026-9C6BC4 |
|---|---|
| Portal lookup | ✓ Lab-verified |
| Checked | 24 Aug 2026date taken from the record, not from a logged check |
| Checked by | Peptigrity staff, against the lab's portal |
| PDF vs portal | Kovera Labs's portal shows validity only |
| Weight | Counts as one lab test |
Independent HPLC purity analysis of Pinealon from trivialbioworks peptides, performed by Kovera Labs on July 2, 2026. Reported purity: 99.536%. Net content: 9.83 mg against 10 mg labeled (98% of label). Endotoxins: PASS (≤0.5 EU/mL); Fentanyl Presence Analysis: Not Detected. Heavy metals: Arsenic, Cadmium, Lead, Mercury — all Negative. Batch PIN10-0626. Sample source: shop-provided. Certificate of analysis attached.
Certificate of analysis
Have you tested this peptide?
Submit your third-party lab test to help the community verify purity claims. Every report is reviewed before publication.
Community discussion