§ TOOL · TESAMORELIN CALCULATORLive lab data
Free tool · Reference figures · Live lab data

Tesamorelin Dosage Calculator

Free tesamorelin reconstitution calculator. Enter vial size (2-5 mg), BAC water volume, and dose to get concentration, syringe units, and doses per vial. Includes the FDA-approved 2 mg daily protocol, visceral fat reduction dosing, and GHRH comparison. Verify tesamorelin quality with independent lab test data on Peptigrity.

A 5 mg vial of tesamorelin reconstituted with 1 mL of bacteriostatic water gives a concentration of 5.0 mg/mL, or 50 mcg per unit on a U-100 syringe. For a 2 mg dose, draw the syringe to 40.0 units (0.40 mL). At that dose the vial provides about 2.5 doses.

Defaults: 5 mg vial + 1 mL from this page's reconstitution quick reference; 2 mg is the "Standard (FDA)" row of this page's dose ladder, used here for arithmetic only.

§ Interactive calculatorLive lab data
TesamorelinPre-locked

1Your vialNew · use the lab-measured amount

How many mg is on the label?
mg
Have the lot number? We’ll use what the lab measured instead of the label.

2Water you'll add

Bacteriostatic water (more water = bigger, easier-to-read draw)
mL

3Your dose

How much per shot? in mcg = 2 mg
mcg

4Your syringe

5 mg vialfill it to here
02040608010040
1.0 mL (100u)pull plunger to the line

Draw the syringe up to

40.0 units (0.40 mL · ≈ 40 on the barrel)

That's one 2 mg dose. Add 1 mL of water to your 5 mg vial first.

5.0 mg/mLStrength
50 mcgPer unit
2.5Doses / vial
Commonly cited research figures, shown as reference. Selecting a row loads that dose into the calculator.
StepDoseDraw on a U-100Doses per vial
Low dose1 mg20 units5
Standard (FDA)2 mg40 units2

Tap any row to load that dose into the calculator above.

What Peptigrity has on Tesamorelin

99.42%Average tested purity
545Lab tests on file
235Shops listed

Educational tool for research use. Not medical advice — it calculates what you enter, it doesn't recommend a dose.

Tesamorelin Commonly cited schedules

Tesamorelin is a 44-amino-acid GHRH analogue - the only FDA-approved peptide in this calculator suite (marketed as Egrifta SV for HIV-associated lipodystrophy). The approved dose is 2 mg subcutaneously once daily. Community protocols vary from this anchor.

ProtocolDoseFrequencyDurationNotes
FDA-approved2 mg (2,000 mcg)1× dailyOngoing (clinical trials: 26-52 weeks)Established in Phase 3; subcutaneous abdomen
Standard community1-2 mg1× daily8-12 weeks on / 4 weeks offCycling to manage GH receptor sensitivity
5-on-2-off2 mg5 days on / 2 off12 weeksReduces weekly consumption by ~29%
Tesa + Ipa stack1-2 mg tesa + 200-300 mcg ipa1× daily (evening)8-12 weeksGHRH + GHRP synergy; see blend calculator

Tesamorelin Reconstitution - Quick Reference

VialBAC WaterConc.1 mg Draw2 mg DrawDoses (2 mg)
5 mg1 mL5 mg/mL20 units40 units2.5
5 mg2.5 mL2 mg/mL50 units100 units (full)2.5
10 mg2 mL5 mg/mL20 units40 units5
10 mg5 mL2 mg/mL50 units100 units (full)5

Common: 5 mg vial + 1 mL BAC water = 5 mg/mL. The FDA 2 mg dose = 40 units - a clean, manageable draw. At 2 mg/mL (2.5 mL BAC), the same dose fills the entire syringe. For technique, see reconstituting peptides step by step.

How Long Does a Tesamorelin Vial Last?

Vial1 mg / day2 mg / day2 mg 5-on-2-off
5 mg5 days2.5 days~3.5 days
10 mg10 days5 days~7 days

Tesamorelin is consumed rapidly - a 30-day cycle at 2 mg daily requires 12 × 5 mg vials or 6 × 10 mg vials. The 5-on-2-off protocol reduces this to approximately 9 × 5 mg vials per month.

Tesamorelin vs Sermorelin vs CJC-1295

PropertyTesamorelinSermorelinCJC-1295 (no DAC)
Full nameModified GHRH(1-44)GHRH(1-29)Modified GHRH(1-29) + 4 AA changes
Amino acids442929 (modified)
FDA statusApproved (Egrifta SV)NDA withdrawn (2008)Not approved
ModificationTrans-3-hexenoic acid at N-terminalNone (truncated native)4 amino acid substitutions for DPP-IV resistance
Half-life~26 min (longer effective due to modification)~10-20 min~30 min
Typical dose2 mg daily200-500 mcg daily100-300 mcg 1-2× daily
Clinical dataPhase 3 trials (n=800+)Limited clinicalMinimal clinical
WADA statusProhibited (S2)Prohibited (S2)Prohibited (S2)

Tesamorelin + Ipamorelin Stack

The tesamorelin + ipamorelin combination pairs a GHRH analogue with a selective GHRP. Tesamorelin provides the releasing hormone signal while ipamorelin triggers GH release through the ghrelin receptor - without elevating cortisol or prolactin. This combination is available as pre-made blend vials from several peptide vendors. For blend dosing, use the Blend Calculator with the Tesa + Ipa preset.

How to Verify Tesamorelin Quality

Tesamorelin is a 44-amino-acid peptide with MW of approximately 5,135.9 Da. Check the CoA for ≥98% HPLC purity and mass spectrometry confirming MW. The trans-3-hexenoic acid modification at the N-terminal should be verifiable. Cross-reference with independent lab test results. For CoA interpretation, see red flags in peptide CoAs.

Related tools

Most-tested peptides

Frequently asked questions

How many units is 2 mg of tesamorelin?

At 5 mg/mL (5 mg + 1 mL BAC water): 2 mg = 40 units. At 2 mg/mL (5 mg + 2.5 mL): 2 mg = 100 units (a full syringe). Use 1 mL BAC water for cleaner draws.

What is the FDA-approved dose?

The FDA-approved dose is 2 mg subcutaneously once daily, based on Phase 3 trials for HIV-associated lipodystrophy. This is the only FDA-approved peptide in the Peptigrity tool suite.

What is the difference between tesamorelin and sermorelin?

Both are GHRH analogues. Tesamorelin is FDA-approved (44 amino acids, trans-3-hexenoic acid modification) with robust clinical data. Sermorelin is shortened GHRH(1-29) with its NDA withdrawn. Tesamorelin has a longer effective half-life.

Can I combine tesamorelin with ipamorelin?

Yes - the Tesa + Ipa stack is one of the most popular GHRH + GHRP combinations. Use the Blend Calculator for combined vial dosing.

How many vials do I need per month?

At 2 mg daily: 12 × 5 mg vials or 6 × 10 mg vials per 30 days. The 5-on-2-off protocol reduces this to ~9 × 5 mg vials.

Is tesamorelin banned in sports?

Yes. Tesamorelin is on the WADA Prohibited List (S2) as a GH-releasing factor, prohibited in- and out-of-competition.

How long does a tesamorelin vial last?

A 5 mg vial at 2 mg/day lasts about 2.5 days. A 10 mg vial lasts 5 days. Tesamorelin is one of the fastest-consumed peptides - plan supply accordingly.

This calculator is for educational and research purposes only and does not constitute medical advice. Doses shown on this page are commonly cited research figures, presented as reference. Compounds discussed may be investigational and not approved for human use. Consult a qualified healthcare provider. Peptigrity is an independent review platform and does not sell, endorse or recommend specific products or vendors. Tesamorelin (Egrifta SV) is FDA-approved for HIV-associated lipodystrophy; use for other purposes is off-label and investigational.