KPV × snap peptides — lab test, June 2026
COA KVR-2026-F423E3 matches Kovera Labs's public record. So this test doesn't rest on our review alone — the lab confirms it too.
AR0VXTGTest results
About this test
Label 10 mg · Lab measured 8.89 mg
89% of label, basis not stated — shown as printed. Reconstituted with 2 mL, a 50-unit draw holds 2.2 mg using the measured mass, against 2.5 mg on the label — 11% less.
One vial from this lot was weighed by the laboratory, not yours. This page reports what the certificate says; it does not recommend a dose.
| Report number | KVR-2026-F423E3 |
|---|---|
| Portal lookup | ✓ Lab-verified |
| Checked | 14 Aug 2026date taken from the record, not from a logged check |
| Checked by | Peptigrity staff, against the lab's portal |
| PDF vs portal | Kovera Labs's portal shows validity only |
| Weight | Counts as one lab test |
Independent HPLC purity analysis of KPV from snap peptides, performed by Kovera Labs on June 30, 2026. Reported purity: 99.53%. Net content: 8.89 mg against 10 mg labeled (89% of label). Tested content is 11% below the labeled amount. Endotoxins: Pass (≤0.5 EU/mL). Heavy metals: As, Cd, Pb, Hg — all Negative. Batch SP26-KPV10-02. Sample source: shop-provided. Certificate of analysis attached.
Certificate of analysis
Have you tested this peptide?
Submit your third-party lab test to help the community verify purity claims. Every report is reviewed before publication.
Community discussion